The Aegis Lighting Control (ALC) System provides a two-way
precision lighting control solution at a fraction of the cost of other
hardwired systems. ALC is the only lighting control system that
seamlessly integrates with the Aegis Home Management System (HMS).
Aegis’s ability to activate lighting in response to events like motion,
sundown or a door opening make ALC an unsurpassed automated
lighting control solution.

Hardwired Aegis Lighting Control (ALC) Switches
-Decora style ALC dimmer and relay switches control lights with “normal” wiring
-Precision fade rates controllable from 1 second to 4 hours
-Network cable “daisy chained” to each switch allows two-way communication with Aegis
-Up to 8 branches of 31 switches (248 total) can be controlled with the Aegis 3000
-Slave switches control Relay and Dimmer Switches via a three-wire cable
-Program Switch can trigger actions through Aegis (without controlling a load)
-Available in white, ivory and almond

Aegis Lighting Control (ALC) Switch Types (create chart like in pdf)
Part Description Series
Relay Switch Multi-way switch for non-dimming loads, 15A ALC-RS
Dimmer Switch Multi-way incandescent and inductive dimmer, 500W ALC-DS
Dimmer Switch Multi-way incandescent and inductive dimmer, 900W ALC-HW-DS
Slave Switch Slave Switch for relay and dimmer (no load control) ALC-SS
Program Switch Able to activate two Aegis macros (no load control) ALC-PS
Scene Switch 4 Button ALC Scene Switch ALC-S4

Hardwired Aegis Lighting Control (ALC) Interface Module (ALC-IB)
-ALC interface is required for ALC control, resides on Aegis mother board
-Single branch version (31 light) for Aegis 1000
-Four Branch version for Aegis 1500 (1 Max.) and 3000 (2 max.)
-Full two-way operation allows Aegis to know when users manually activate switches
-Provides status information on lighting levels via telephone, computer or displayed on Aegis wall
consoles
-Aegis can execute macros and commands based on sensing ALC switch activation

Seven Button Scene Switch (AEG-Scene)
-Single gang device (not gangable with other devices)
-Each switch activates up to seven scenes denoted by easy to read (word processor generated) labels
-Up to 16 switches may be “daisy chained” to communicate with Aegis via RS-485
-Requires 4-wire cable to Aegis, 2 ea. for 12V DC power from Aegis, 2 ea. for RS-485 communication
-Individually controllable LED’s may be used to indicate status of each switch or other status
-Built-in driver support in Aegis 3000 controller
-Available in white only

Warranty 1 year on parts