Aegis Thermostats
Aegis Thermostats replace existing thermostats that control of the building’s HVAC
unit(s) via the existing wiring. These thermostats communicate with the Aegis Control
Module via an additional three-conductor control cable. All Aegis thermostats provide
the following features:
-Attractive low profile design with large easy to read display
-Energy Star Certified
-Manual override for all functions and “Hold” button to prevent automatic operation
-Heat/cool set points, heating/cooling mode and fan controllable by Aegis system
-Filter change reminder
-Adjustable cycle times and anticipation
-User control and status reporting through Aegis via telephone, Personal Computer or Aegis wall consoles
-Temperature control based on any event (i.e. residents leaving, interior motion, security status, etc.) or time
-Thermostats also display outdoor temperature when outdoor sensor is used
-Remote temperature sensors allow thermostats to be hidden

Aegis Thermostat Types (SEE PDF)
TS-1 Single stage heating/cooling
TS-2 Heat pump (2 stage heat, 1 stage cool)
TS-3 Single stage heating/cooling for zoned damper control system
TS-4 Two-speed heat pump (3-stage heat, 2 stage cool)
TS-6 Two stage conventional heating and cooling system systems with EEC

Outdoor Temperature Sensor
-Weather Resistant, mounts outdoors under an overhang
-Displays outdoor temperature on Aegis thermostats throughout the home
-Allows residents to check outdoor temperature through any telephone, Aegis thermostat or wall console
-Outdoor temperature can trigger any event or anticipate HVAC requirements
-Outdoor temperature can be used to provide freeze warning or “wear coat” or other messages

Programmable Energy Saver Modules (PESMs)
-Used for special applications where Aegis thermostats are unsuitable
-Bypasses existing non-Aegis thermostats to effect energy saving
-Four (4) Wire to connection to Aegis

Warranty 5 years on parts


HMS / Lighting / Security
back to Product Page